News classification
Contact us
- Add: Fuyong in shenzhen city, guangdong province town of white stone mansion west industrial zone of A4
- Tel: 86-0755-27380299 27386566
- Fax: 86-0755-27396623
- Email: 136-0041-0733曾生
What are the functions and applications of compression springs? Fuyong Spring Factory
Compression springs are commonly used in applications such as valve springs, trains, balancers, and bicycle seats. Shenzhen Hongjie Hardware Spring Factory is a professional manufacturer of springs
Compression springs are commonly used in applications such as valve springs, trains, balancers, and bicycle seats.
Compression springs are the most widely used, and during the manufacturing process, they must be wrapped around separate spiral rings, so that each ring has a gap for force contraction, in order to always maintain tension at both ends.
When subjected to maximum load, it cannot be fully compressed.
There must be a gap between the effective rings to avoid friction or other material embeddings, which can cause fatigue damage.
The free length of the compression spring should be equal to the total length of the steel wire diameter of the compression spring plus the distance, plus the amount of deformation. In order to increase the contact surface of the compression spring, the surface should be smooth to obtain 50% or 80% of the contact area. Its end shape is variable.
Navigation: Shenzhen Hongjie Hardware Spring Factory
Address: Building A4, West District, Baishixia Industrial Zone, Fuyong, Bao'an, Shenzhen
Tel: 0755-27380299
Compression springs are the most widely used, and during the manufacturing process, they must be wrapped around separate spiral rings, so that each ring has a gap for force contraction, in order to always maintain tension at both ends.
When subjected to maximum load, it cannot be fully compressed.
There must be a gap between the effective rings to avoid friction or other material embeddings, which can cause fatigue damage.
The free length of the compression spring should be equal to the total length of the steel wire diameter of the compression spring plus the distance, plus the amount of deformation. In order to increase the contact surface of the compression spring, the surface should be smooth to obtain 50% or 80% of the contact area. Its end shape is variable.
Navigation: Shenzhen Hongjie Hardware Spring Factory
Address: Building A4, West District, Baishixia Industrial Zone, Fuyong, Bao'an, Shenzhen
Tel: 0755-27380299
